PVC Inflatable Boat Repair Kit
The set includes:
- Glue 30 g
- 2 spare patches with a size of 15 x 22 cm
- Case
The repair of a small leak or puncture less than 1/2 inch (12.7mm) can be made with a round patch, 3 inch (76,2mm) diameter minimum. It is recommend that boat be returned to selling dealer for all large repairs.
Method of use:
Surfaces must be dry, free of grease and other contaminants.
Prepare a patch of PVC.
Sand the surfaces lightly.
Apply a primer layer, then with an interval of 5 minutes apply a second and third layer, after applying the third layer wait 10-15 minutes and press both parts well. Use a hard roller to roll the repaired area, and you can also use a suitable object for long-term clamping.
Do not operate the boat earlier than 24 hours after the repair.
Attention:
Keep out of reach of children.
It is very toxic in case of spillage.
Close the package tightly after use.
Use outdoors or in well-ventilated areas.
Use gloves when working.
Do not expose to open flame.
Store at a temperature of 10 to 30 C