FilStar FSBA-31 | Bite Alarm set
-
Code:949402
Bite Alarm set | FilStar FSBA-31 | 3 + 1
FSBA-31 Set of three alarms and one receiver, equipped with a convenient organizer with a zipper. The FSBA-31 set features an extremely functional design and includes all the necessary features to cover the needs of carp fishing. Each of the alarms lights up with a certain color (green, red and blue), and when one of them is activated, the corresponding color lights up on the receiver. The alarms have a light transmitting shell that allows trouble-free signal transmission. The kit includes the batteries needed to operate all components.
Characteristics of the alarms:
- Waterproof.
- Five levels fadjustable sensitivity, volume and tone.
- 20 second memory signal light.
- Roller wheel with LED lighting (Night light control).
- 5 LED light in front, illuminating rolling in the direction of movement of the line.
- Input to 2.5 mm jack for connection to a swinger.
- Works with 1 x LR23A 12V battery (included in the set).
- Size 11cm x 4cm x 4cm.
Receiver characteristics:
- Waterproof.
- 8 levels of volume (first level is vibration).
- Connection with up to 6 alarms.
- 6 LED lights with different colors, corresponding to the colors of the alarms.
- 20 second memory function.
- Adjustable lamp brightness.
- Receiving distance with over 100 m.
- Works with 2 x AAA 1.5V batteries (included).
- Size 8.5cm x 4cm x 4cm.
The factory default setting of this fishing alarm set is the automatic connection of alarm and receiver. When the alarm triggers the message, the message light of corresponding colour on the receiver flashes and the sound synchronizes. If you need to add a code or clear a code, do the following:
Linking alarm and receiver:
- Turn ON the alarm.
- Turn ON the receiver.
- Press and hold the receiver's buttons + and - at the same time and release them after 2 seconds when a short sound is heard.
- Pull the alarm wheel to trigger the message.
- The corresponding message light on the receiver flashes and the sound is synchronized.
- Code alignment is completed.
Clear all codes:
- Turn ON the receiver.
- Press and hold the receiver's buttons + and - at the same until beep (long sound, after 7 seconds).
- Codes are removed.
